Ersatzteile-Distribution und Klassiker-Service
DJM-900 NXS2
Schematiken:
Die Positionsnummern aus den Schematiken finden Sie teilweise hinter den Produktnamen.
LEIDER NICHT MEHR LIEFERBAR!
Rechte seitliche Gehäuseabdeckung (PosNr:36)
Linke seitliche Gehäuseabdeckung (PosNr:35)
Vordere Gehäuseabdeckung (PosNr:37)
Rechte obere USB-Abdeckung Version A siehe Details !
Rechte obere USB-Abdeckung Version B
Eine Abdeckung der linken oberen USB-Buchsen
USB-Abdeckung (Ersatz zu DNK6551)
Buchse,(XLR), MASTER L/R
Klinkenbuchse, Position siehe->
LAN/Netzwerk (RJ45)-Buchse
Klinkenbuchse, Position siehe ->
Klinkenbuchse 6.3mm, Position siehe->
Kopfhöhrerbuchse (Klinke 3,5mm)
USB-Buchse
Netzkabelbuchse (PosNr:14)
DIGITAL OUT - Buchse
MIC1 - (MIC2) Buchse
USB-Buchse (B-Type), Auf Anfrage !
4er Cinch-Buchsenblock
DIGITAL-IN Cinchbuchsenblock (CH1-CH4)
Komplette Crossfadereinheit
RB160L-40
Faderfilz. Position siehe ->
Gerätefuss
Neue Halterung wenn die neue Abdeckung DNK6552 nachbestellt wird
Original USB-Kabel
Kabel von der Crossfaderplatine
40 PIN Flachbandkabel (PosNr:16, "9.2 Exterior Section")
Flachbandkabel (PosNr:17, "9.2 Exterior Section")
Flachbandkabel (PosNr.12, "9.2. Exterior Section")
Flachbandkabel (PosNr.13, "9.2. Exterior Section")
Flachbandkabel (PosNr:14, "9.2. Exterior Section")
Flachbandkabel (PosNr:15, "9.2. Exterior Section")
Flachbandkabel. Pos.Nr: 12, "9.3 Bottom Section")
Flachbandkabel. (PosNr. 11, "9.3 Bottom Section")
Flachbandkabel. (PosNr:7, "9.3. Bottom Section")
Flachbandkabel. (PosNr:8, "9.3. Bottom Section")
Flachbandkabel. (PosNr: 9, "9.3. Bottom Section")
Flachbandkabel. (PosNr:10, "9.3. Bottom Section")
Flachbandkabel (PosNr:6, "CONTROL PANEL SECTION (1/2)")
Flachbandkabel. (PosNr: 4, "9.5 CONTROL PANEL SECTION (2/2)")
Flachbandkabel. (PosNr:5, "9.5 CONTROL PANEL SECTION (2/2)")
Flachbandkabel. (PosNr: 6, "9.5 CONTROL PANEL SECTION (2/2)")
Flachbandkabel. (PosNr: 7, "9.5 CONTROL PANEL SECTION (2/2)")
Knopf. Siehe Position ->
Knopf, TIME-(BEATS)
Knopf, siehe Details ->
Knopf ( EFFECT SELECT)
POWER- Knopf
Knopf für PARAMETER, FILTER
Knopfhaken, Faderknopfteil 3 (C)
Knopf für: DJM-900 SRT (BALANCE), DJM-900NXS2 (BALENCE, MasterLEVEL)
Knopf für COLOR-FX-Potentiometer
Knopf, TRIM/Gain(CH1-CH4)
Knopf, Hi, Low von MIC
Knopf, Position siehe ->
Knopf für den Eingangswahlschalter
MIC1/2 Level - Knopf
Knopfrahmen für den POWER-Knopf
Faderknopfteil (B)
Faderknopfinnenteil
Originale gelbe LED
Grüne LED für die Pegelanzeige
Rote LED für die Pegelanzeige
LED Lens "CLIP"
LED Lense "BEAT FX"
Masseschraube (Rändelschraube) für Plattenspieler
Mutter. Siehe Position ->
Mutter (PosNr. siehe Details)
USB-Platine (PosNr2)
MIC - Trim Platine (PosNr:10)
USB-Buchsenplatine (PosNr:3)
INPUT-Platine (PosNr:1)
TRIM-Platine Kanal 1 (PosNr:4)
TRIM-Platine Kanal 2 (PosNr:5)
TRIM-Platine Kanal 3 (PosNr:6)
TRIM-Platine Kanal 4 (PosNr:7)
USBP-Platine (PosNr:8)
Kopfhöhrerbuchsenplatine, kleine Buchse, (PosNr:9)
Kopfhöhrerbuchsenplatine, gruße Buchse, (PosNr:11)
MAIN CONTROL - Platine (PosNr1)
SEND-Platine, (PosNr:2)
REGB-Platine (PosNr:3, 9.3 BOTTOM SECION)
Netzschalterplatine (PosNr:4)
HPPW - Platine, (PosNr:5, 9.3 BOTTOM SECION)
Netzteilplatine (PosNr:6)
Fader CH1 mit Platine (PosNr:22)
Fader CH2 mit Platine (PosNr:23)
Fader CH3 mit Platine (PosNr:24)
Fader CH4 mit Platine (PosNr:25)
Potentiometer, Siehe Position ->
TRIM - Potentiometer (GAIN) CH1 bis CH4
Original Kanal-Faderpoti
Potentiometer. LEVEL/TRIM MIC1 /2.
Potentiometer für: siehe Details ->
Potentiometer. Siehe Details->:
Potentiometer "MASTER LEVEL"
Drehschalter, Position siehe ->
Tastschalter. Siehe Position ->
Drehschalter, siehe Position ->
Schiebeschalter. Siehe Position ->
Schiebeschalter, Position siehe ->
Original Mikroschalter, PLAY , CUE. SIEHE DETAILS ->
Netzschalter
Drehschalter: Position siehe ->
Schmiermittel für die Mechanik
Schraube. Position siehe ->
Schraube, Position siehe ->
Schraube. Siehe Position ->
Schraube der Frontplatte
Kurzschlusstecker, Cinch (für die Phonobuchsen)
LTC114EUB
Unterlegscheibe, Position siehe ->